10BaseT Fault Tolerant Transceiver
Documentation
Description
The ETP1010 is an Ethernet* Fault Tolerant Transceiver, that offers a level of connectivity protection for your network. The ETP1010 allows you to replace a single segment of cable, between two network devices, with two segments of cable placed through different geographical paths, to ensure data transfer protection should one cable be faulty, cut, damaged or pulled. That means to say the chances of your network segment going down due to accidental damage are halved. The ETP1010 is equipped with one AUI port and two RJ45s with an automatic hunt feature between the UTP channels.
Features
- Dual RJ45 ports for transmission on two separate twisted pair cables
- Nine switches to configure the ETP1010 to your specific needs
- Fourteen LEDs to give a comprehensive readout of data transmissions
- User selectable priority channel and hunt speed selectable between 2.5 and 10 seconds
- No power supply required
- Provides redundant data path with a second cable
- Adds reliability to the weakest link in the chain
- Assurance of continuing communications in case of accident or wiring fault
- Rugged high strength steel casing
- IEEE 802.3, FCC Class A and VDE Class B compliant
- Made in USA
Technical Specifications
| Ethernet* v 2.0 | AUI: One Male DB15 |
| Interface | UTP: 2x RJ45 |
| LEDs | AUI: Four Squelch, Transmit, Collision & Power Receive, Polarity, Link, Jabber & Enable UTP: (Channel A & B) (5 LEDs each channel) |
| Switches | AUI Port:(4 Position DIP) 1) A or B Primary channel Selection 2) SQE / HBE 3) 2.5 or 10 second selection A & B Channels 1) & 3) Reduced Squelch |
| Weight | 13 oz. |
| Dimensions | 6.9″ (175mm) x 2.8″ (71mm) x 0.8″ (20mm) |
| Environmental | Operating Temperature: +5 to +55 C |
| EMI & Safety | FCC Class A, CE |
