The ERMGFT350 is a tri-speed fault tolerant transceiver that was designed for rugged use, easy installation and high performance. It is specially suited for mission critical applications in industrial, commercial, and business environments. The device provides redundant paths for 10/100/1000 Ethernet systems with full auto-negotiation and MDI/MDIX. The transceiver should be used with ERM21C, a 21 slot rack mount chassis.
- Intelligent logic detects both loss of link pulse and loss of data
- Automatically hunts for data packets on both redundant channels
- Optional support for link-only failures without hunting
- Supports Full/Half duplex modes for 10/100/1000Mbps
- MDI/MDIX auto-sensing between uplink or direct connections on each port
- Designed and manufactured in the U.S.A.
The device provides redundant paths for 10/100/1000 Ethernet systems. It contains three ports: main, primary, and secondary. Typically, the main port connects to a critical Ethernet device. The primary and secondary ports connect to two different network pathways and are the redundant ports. These pathways can include two switch ports on the same switch, two different ports on separate switches, or separate servers/devices with Ethernet connections.
The unit can operate in either link-only or hunting mode. In link-only mode, the device will pick a redundant port that has a link. If both redundant ports have a link, it will select the primary port.
In hunting mode, the device will not only check for a link, but also hunt for data packets if there hasn’t been any activity for a certain amount of time. The device monitors both ports simultaneously and if data packets are present on both ports, it will opt for primary port. Hunting mode ensures redundancy in the case of data transport failure.
|Standards||IEEE 802.3i, u, x, z, ab|
|Connectors||3 auto-negotiation 10/100/1000 Mbps RJ-45 switching ports|
|Data Transfer Rate||Full/Half duplex transfer mode for 10/100/1000Mbps|
|Dimensions||88.5mm x 71mm x 19mm|
|Diagnostic LEDs||Per Unit: Power, Active Port|
Per Port: Speed, Link/Activity
|Power Consumption||3W Maximum|
|Temperature||Operating: -10 to 50 degrees Celsius|
Storage: -20 to 70 degree Celsius
|Humidity||5 to 95% RH, Non-condensing|
|EMI & Safety||FCC A, CE|