EtherCom

The Connectivity Connection

The Connectivity Connection
510.440.0242
info@ethercom.com
  • Home
  • About Us
  • Products
    • Ethernet Transceivers
      • E8PFO
      • EB02
      • EFL01
      • EB05
      • ETP910N
    • Fault Tolerant Transceivers
      • EFTS1025
      • EFTT1003
      • EFTT1039
      • ERMFTT1008
      • ERMGT350
      • ETP1010
      • ETP1020N
    • Hubs & Repeaters
      • EC200, EC400, EC800 Series
      • EC880 Series
      • EHB44 and EHB46
      • EHB89 Series
      • EHB162S and EHB163S
    • Ethernet Switches
      • ERS6FT2TX-GTX
      • ES6T2F
      • ESG5
      • ESG6T2F
      • ESG9
      • ESG51
      • ESG81
      • ESG500
      • ESM41
      • ESM81
      • ESM500
      • ESM900
      • ERSG9 Series
    • Ethernet Media Converters
      • EFM12N
      • EFM14
      • EGM102
      • EMB11
      • EMC01
      • EMC01N
      • EMC02N
      • EMC03
    • Rack Mount Chassis
      • ERM02
      • ERM12N
      • ERM14
      • ERM21C
      • ERMC01N
      • ERMB11
      • ERMFTT1008
      • ERMG102
      • ERMGFT350
  • Technical Resources
    • Glossary
    • Data Sheets / User Manuals
    • EtherCom Limited Warranty
  • News
  • Contact Us

EFTT1039

10/100TX Ethernet Fault Tolerant Transceiver

Fault Tolerant Tansceiver | EFTT1039

Documentation

  • EFTT1039 Data Sheet PDF

EFTT1039, 10/100TX Ethernet Fault Tolerant Transceiver, was designed for rugged use, easy installation and high performance in industrial, commercial, and in business environment for mission critical application. The device provides redundant paths for 10BaseT or 100BaseTX Ethernet systems. It has three ports: main, primary and secondary, all 10/100TX auto negotiating and MDI/MDIX. Typically, the main port connects to a critical 10BaseT or 100BseTX Ethernet device. The primary port and the secondary ports connect to two different switch ports or two different ports on separate switches or servers or devices with Ethernet connection. When the unit powers up, it checks both primary port and secondary port for link signal. Once the link is established, it will hunt for data packets on both the ports by scanning each port. If data packets are present on both ports, it will opt for primary port. If the primary port loses data packets and/or link signal, the path will be connected to secondary channel. Once the link is restored on the primary channel, the path will swing back to the primary channel. EFTT1039 has an important feature of being able work in fail safe mode in the event of power failure to it. The data path will remain connected between main port and primary port through the FailSafe ByPass circuit. (The total cable length of both main and primary ports should not exceed 100m for this feature to be used.)

Features

  • EFTT1039 reduces network downtime and enhances the level of redundancy
  • Adds reliability to the weakest link in the chain
  • Assurance of continuing communications in case of accident or wiring fault
  • Ensures connection even if a segment is damaged or sabotaged
  • Intelligent unit detects both loss of link pulse and loss of data
  • Hunts for data packets on both primary and secondary channel
  • Will switch over if link is present but no data packets
  • Provides fault tolerant links between critical paths
  • Ideal for mission critical applications
  • FailSafe ByPass circuit in the event of power failure. Main port will connect to primary port without power being present to the device
  • IEEE 802.3, IEEE 802.3u compliant
  • Auto MDI/MDIX Auto-sensing between uplink or direct connections each port
  • Plug and Play
  • Support Full/Half duplex transfer mode for 10 and 100 Mbps
  • Full wire speed reception and transmission
  • Supports Auto-Negotiation for 10/100TX and duplex mode
  • Compact size and easy to install
  • Rugged high strength steel casing
  • Supports use of redundant pow er supply. Two power supply jacks for redundant power supply
  • Designed & manufactured in the USA

Technical Specifications

Standards IEEE 802.3, IEEE 802.3u
Protocol CSMA/CD
Connectors 3 auto-negotiation 10/100 Mbps RJ45 switching ports
Cable Requirements Ethernet: 2 pair UTP Cat.3, 4, 5, up to 328ft/100m
Fast Ethernet: 2 pair UTP Cat.5, up to 328 ft / 100 m
Data Transfer Rate Full/Half duplex transfer mode for 10/100 Mbps
Diagnostic LEDs Per Unit: Power, DC #1 & DC #2
Per Port: Speed (100 Mbps) Link/Activity, Full Duplex
Dimensions 86.6 mm x 75.8 mm x 22.6 mm (L x W x H).
Total width with wings: 105 mm
Power Adapter 12 Vdc @ 1 A
Power Consumption 5 W Maximum
Temperature Operating: 0 to 50 degrees Celsius
Storage: -10 to 70 degree Celsius
Humidity 5 to 95% RH, Non-condensing
EMI & Safety FCC A, CE

Copyright © 2021 by EtherCom ยท Site by Last Laugh Creative