9 Port Rack-mount Switch
All COPPER or All FIBER or ANY Combination
This layer 2 switch has been designed for great flexibility at a very reasonable price. Copper 10/100TX & Fiber FX can be mixed on ports 1 through 8. Port 9 can be 10/100/1000 copper or Gigabit SX or LX fiber. The FX ports can be SC single mode (up to 50 km) or multi-mode (2 km) ST or SC. Triple speed products like this allow you to leverage existing technology without investment in software and personal training.
Management via console port for VLANs, QOS, Port Trunking and a number of functions.
GigE & Fast Ethernet LAN switch was designed in order to ensure cost effective, simple migration from 10 Mbps to 100 Mbps to 1000 mbps maintaining the Ethernet transmission protocol, Carrier Sense Multiple Access Collision Detection (CSMA/CD). Triple speed products offer the ability to leverage your existing network investment.
- Can be ordered with all Copper or all Fiber or any combination
- In copper; ports 1 through 8 are 10/100 port number 9 is 10/100/1000
- Console port management interface
- Supports Port Based VLAN
- QOS (Quality of Service) Supports 2 queues
- For Voice over IP applications
- Fiber Ports can be Single (SC) or Multi Mode ST or SC
- Gigabit Fiber can be SX or LX
- Auto Negotiation for 10/100TX, Full/half Duplex & crossover
- Wire speed reception & transmission
- Will recognize up to 2048 MAC addresses
- Supports packets to 1522 bytes
- Broadcast Storm Protection
- Made in the USA
|Standards Compliance||FCC Class A & CE|
|Bandwidth||2.8 Gbps backplane, Wire speed reception & transmission|
|Broadcast storm protection|
|Cabling||10/100TX UTP Category 5, maximum cable distance 100 meters
10/100/1000TX UTP Cat. 5e or Cat. 6
100 mbps Fiber: Single mode or Multi Mode
Multi Mode: 50/125 or 62.5/125, 1310 nm (50 to 100 microns) up to 2 km.
Single Mode: 9/125, 1310 nm (8.3 to 10 microns) up to 50 km.
1000 mbps: SX, 850 nm 62.5/125 to 220 m, 50/125 to 500 m. LX, 1310 nm 9/125 to 10 km.
|Connectors: Total 11||DB9 for console management
IEC for main power cord
Ports 1 through 8: Customer choice of 10/100 RJ45, ST or SC multimode fiber or SC single mode fiber.
Port 9: 10/100/100 RJ45 SX or LX Gigabit Fiber
|Dimensions||Height 1.75” (45 mm)
Depth 4.26” (109 mm) not inc. connectors
Width 17.0” (430 mm)
|Environmental||Operating Temperature: 32 to 122 F (0 to 50C)
Storage Temperature: -4 to 140F (-20 to 60 C)
Relative Humidity:5% to 90% (non-condensing)
|Flow control||Half Duplex. Back pressure|
|LED Indicators, Total 29||1 for power, 3 each for ports 1 through 8 & 4 for port 9|
|MAC addresses||Look up engine supports 2048 different addresses
Automatic learning, address aging & address migration
|Network Speed||Copper 10/100/1000 Half/Full Duplex Auto Negotiating
Fiber 100 TX & 1000 Gigabit on port 9
|Network Standards||IEEE802.3 Ethernet
IEEE802.3u Fast Ethernet
IEEE802.3ac VLAN tagging
IEEE802.3ad Link Aggregation Control Protocol
IEEE802.1D Spanning Tree Protocol & Traffic Priorities
IEEE802.1p Priority tags
IEEE802.1s Multiple Spanning Tree Protocol
IEEE802.1w Rapid Spanning Tree Protocol
IEEE802.1x Port Authentication
IEEE802.3x Flow control pause
|Performance||2 Gigabit switching capacity
64 byte packet forwarding rate: 35.7 Mbps
12K x 64 SRAM
Packet length to 1522 bytes
Forwarding & filtering at non-blocking full wire speed
|Weight, (Shipping)||5 lbs.|
|Warranty||Limited 5 Year Hardware Warranty|
|Ordering Information||ERS8TX-GTX: 9 Port Switch with all copper RJ45 ports
ERS8Fx-GFX: 9 Port Switch with 1-8 FX ST or SC. Port 9 is SX or LX gigabit.
Ports 1 through 8 can be any mix of:
Port 9 can be