EtherCom

The Connectivity Connection

The Connectivity Connection
510.440.0242
info@ethercom.com
  • Home
  • About Us
  • Products
    • Ethernet Transceivers
      • E8PFO
      • EB02
      • EFL01
      • EB05
      • ETP910N
    • Fault Tolerant Transceivers
      • EFTS1025
      • EFTT1003
      • EFTT1039
      • ERMFTT1008
      • ERMGT350
      • ETP1010
      • ETP1020N
    • Hubs & Repeaters
      • EC200, EC400, EC800 Series
      • EC880 Series
      • EHB44 and EHB46
      • EHB89 Series
      • EHB162S and EHB163S
    • Ethernet Switches
      • ERS6FT2TX-GTX
      • ES6T2F
      • ESG5
      • ESG6T2F
      • ESG9
      • ESG51
      • ESG81
      • ESG500
      • ESM41
      • ESM81
      • ESM500
      • ESM900
      • ERSG9 Series
    • Ethernet Media Converters
      • EFM12N
      • EFM14
      • EGM102
      • EMB11
      • EMC01
      • EMC01N
      • EMC02N
      • EMC03
    • Rack Mount Chassis
      • ERM02
      • ERM12N
      • ERM14
      • ERM21C
      • ERMC01N
      • ERMB11
      • ERMFTT1008
      • ERMG102
      • ERMGFT350
  • Technical Resources
    • Glossary
    • Data Sheets / User Manuals
    • EtherCom Limited Warranty
  • News
  • Contact Us

EFM12N

Media Converter | EFM12N

Documentation

  • EFM12N Data Sheet PDF

Overview
Model EFM12N, 100BaseTX to 100BaseFX media converter, is an exceptionally small stand alone unit, designed to allow the network designer to add fiber segments as needed.

Description
EFM12N, 100BaseTX to 100BaseFX media converter, allows 100BaseTX specifications to be used over fiber cable.
Designed to meet the needs of today’s network planers to marry the Fast Ethernet performance with the benefits of fiber segments, the EFM12N media converter complies with the 100BaseTX 802.3u standard.
A complement of 6 LEDs display power for the unit plus link and receive on each segment. A wall mount 12 VDC power supply is supplied with the unit with 110- 240 Vac input.
The 100BaseTX side of the unit features a MDI/MDIX crossover switch that dispenses with the any need for specially configured cables.

Features & Benefits

  • Converts 100BaseTX to 100BaseFX and vice-versa
  • Allows for the introduction of a fiber segment to: greatly increase segment length, eliminate electro-magnetic interference, and offers protection from lightning
  • Multimode configuration standard, the optional single mode can increase fiber segment lengths from 2 Km. to 50 Km.
  • MDI/MDIX switch on 100BaseTX side of converter
  • Compact rugged steel enclosure
  • Half duplex/full duplex
  • Designed & manufactured in the USA


Technical Specifications

Network Standards Ethernet IEEE 802.3u
Speed 100 Mbps
100BaseFX Multimode Wavelength: 1300nm
Optical Output Power: Min. -19dBm, Max. -14dBm
Optical Input Power: Min. -30dBm, Max. -14dBm
SC Connector
100BaseFX Single mode Wavelength: 1300nm
Optical Output Power: Min. -15dBm, Max. -8dBm
Optical Input Power: Min. -34dBm, Max. -8dBm
SC Connector
Power Requirements Input Voltage: 110- 240 Vac wall mount power supply
Output Voltage: 12V DC 1.0 amp.
LEDs Total 6: 1 for power & 2 for each port displaying Link & Receive, and Error.
Weight 1 lbs. (0.5 kg) including power supply.
Dimensions 3.3”x 2.1” x0.7” (12.95 cm x 5.8 cm x 1.52 cm)
Environmental Operating Temperature: 32 to 122F (0 to 50 C)
Storage Temperature: -4 to 140F (-20 to 60 C)
Relative Humidity: 5% to 90% (non-condensing)
Connectors 1 Fully Shielded RJ45 Connector, choice of SC or ST Fiber Connector.
External Power Module Connector.
Cabling UTP Category 5, maximum cable distance 100 meters.
Fiber, maximum cable distance 2 Km multimode,
50 Km single mode
Regulatory and
Safety Approvals
EMI FCC Class A, CE
Warranty 5 years

Ordering Information

EFM12N-SC Multimode 100BaseTX to 100BaseFX Converter with SC Connector
EFM12N-ST Multimode 100BaseTX to 100BaseFX Converter with ST Connector
EFM12N-SM Single mode 100BaseTX to 100BaseFX Converter (only with SC Connector)

Copyright © 2021 by EtherCom · Site by Last Laugh Creative