Thumbnail Image

Multi-port Repeater Series

Features and Benefits

Application Information

The Multi-port Repeater series allows for connection between two and eight Ethernet IEEE 802.3 segments. Each segment can support up to 30 computers, that means that our 800 series repeaters can support 240 computers. The 400 series has four BNC ports, whereas the 800 series has eight BNC ports. For media flexibility, these units also offer AUI and / or fiber connections for connection to the backbone or remote facility. The 200 series two port repeaters can be configured in any combination of Fiber, BNC or AUI. All multi-port series repeaters re-time data packets, regenerate preamble, extend collision fragments and automatically or manually partition problem segments. All our Multi Port Repeaters have the connectors located on the front panel for easy accessibility, and the LEDs located on the front for ease of monitoring.

Technical Specifications - Multi-Port Repeater Series

EC200 Series
EC400 Series
EC800 Series
Network StandardsEthernet V/2 IEEE 802.3Ethernet V/2 IEEE 802.3Ethernet V/2 IEEE 802.3
Speed10 Mbits/Sec10 Mbits/Sec10 Mbits/Sec
LEDsRepeater: Power, Jam, Activity
Per Port: Receive, Collision & Partition		Repeater: Power, Jam, Activity
Per Port: Receive, Collision & Partition		Repeater: Power, Jam, Activity
Per Port: Receive, Collision & Partition
Power Supply90 - 270V, Universal Power Supply90 - 270V, Universal Power Supply90 - 270V, Universal Power Supply
Power Consumption10 Watts Max.18 Watts Max. 36 Watts Max.
Dimensions / Weight7.5" W x 8.0" L x 1.7" H, 2.75 lbs.11.0" W x 8.0" L x 2.75" H, 5.25 lbs.15.25" W x 8.0" L x 2.75" H, 10.75 lbs.
EnvironmentalFCC Class A, Conformité Européene (CE Mark)FCC Class A, Conformité Européene (CE Mark)FCC Class A, Conformité Européene (CE Mark)
Temperature & Humidity0 to 50 C / 10% - 95% non-condensing0 to 50 C / 10% - 95% non-condensing0 to 50 C / 10% - 95% non-condensing

Connectors (All Models):

AUI Interface:DB15 female with slide locks. Ethernet type 2, or 802.3 interface + 12 volts Poly-fused outputs.
BNC (10Base2):Fully isolated outputs per 10Base2 500Vrms. Interface: Filtered ring BNC Connectors for reduced emissions.
Fiber Interface:Standard: ST Connectors. SMA connectors are available as a special order item at extra cost.

Ordering Information, Ordering Hotline & Techical Support

TEL: (510) 440 - 0242
Fax: (510) 659 - 8296

EC200 SeriesEC400 Series
EtherCom Model #DescriptionEtherCom Model #Description
EC200BNC / BNC Connections EC4004 BNC & 1 AUI Connections
EC201BNC / AUI Connections EC4014 BNC & 1 Fiber Connections
EC202BNC / Fiber Connections
EC203AUI / AUI Connections EC800 Series
EC204AUI / Fiber Connections EtherCom Model #Description
EC8008 BNC & 2 AUI Connections
EC205Fiber / Fiber Connections EC8018 BNC & 1 AUI & 1 Fiber Connections
EC205MSMulti Mode Fiber /
Single Mode Fiber Connections 		EC8028 BNC & 2 Fiber Connections
EC205SSSingle Mode Fiber Connections
Note: All EtherCom Fiber Products Can Be
Supplied In Single Mode Configuration
EtherCom Corporation
1409 Fulton Place
Fremont CA 95439. USA
Tel: (510) 440-0242
Fax: (510) 659-8296
 
EtherCom reserves the right to change
specification and product offerings at
any time. ©EtherCom 1999
HomeCorporate BackgroundProduct GuideWhat's New?Contacting EtherCOM

EtherCom welcomes your questions or comments regarding this service.

©1999 EtherCom Corporation